Log Cabin BaseIn order to install your log cabin a decent flat base needs to be put down first. If you are going to be laying the base yourself then here is our simple guide to constructing the base for your log cabin to sit on. The base can be either a single concrete base or slabs fixed with concrete.
The first step is to acquire the information on the size of the base required and mark out the area on the land that you would like your log cabin to sit. It is recommended that you give an extra 20 cm for sturdiness as well as if there is any errors.
Dig out the area to a depth of about 4 to 6 inches (approx 15 cm) down so that the base will sit flush with your existing ground.
Step 2Place down a square wooden beam structure around the edge of the dug out space, making sure it all sits square and flush, joining each beam together with screws to make a secure unmoving frame.
Fill the area with course
sand or gravel making it as level and compact as possible making it easier for laying the concrete or the blocks on top.
The end result will be a flat and stable base to install your cabin onto. We find that a solid concrete base is the best option for installing a cabin rather than a block base but both have their own merits. Most of our customers opt to have their bases built for them by an independent contractor or we pass on the details of someone in their area who could do the base. If you choose to build the base yourself we hope that this guide will be of some use to you.
Visit our Website for more information and our full product range: www.lillevilla.co.uk
Phone Number:(01245) 400202